Tabla de contenido
Idiomas disponibles
Idiomas disponibles
standardised test given in EN 60129 and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm, organisation of work patterns.
APPLICATION
This tool is intended as a stationary machine for performing length ways and cross ways straight cuts in
wood ( and light aluminum with a special blade for aluminum ) also possible are horizontal miter angles of
45° (left side) to 45° (right side) as well as vertical bevel angles of 45° (left side).
are devoted to continuously improving and perfecting the existing products.
Therefore, the technical performance and design concept of products may vary without any prior notice;
Our apology for any possible incurrence of inconvenience therefore.
Read and follow the operating instructions and safety information before using for the first time. Save this
manual.
WARNING
When using electric tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury including the following.
Read all these instructions before attempting to operate this product and save these instructions.
The use of any accessory or attachment other than one recommend in this instruction manual may present
a risk of personal injury.
Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance.
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Make sure the voltage corresponds to the type label on the unit.
The power tool noise output may exceed 85dB(A) at the workplace. In this instance, wear ear protection.
SYMBOLS
Read the manual
Warning
Double isulation
Wear eye protection
Wear ear protection
Wear dusk mask
Do not dispose of old appliances in the
household garbage
Disconnect from power supply while
maintance
GB
2
Tabla de contenido
