Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly (continued)
13
Installing back panels
Now, go back and securely tighten all the cam locks and screws. Make sure all the parts are tight and there are no
□
gaps between the parts. This will help keep the unit square.
Ask for assistance to flip around the previous assembly at its front edges.
□
□
Pick up the upper back panel (A1) and align the pre-drilled holes against the upper long edge with the pilot holes
on the back of top panel (N). Fasten it in place with the provided washer head screws (II).
Using the pilot holes as a guide, align and attach the side back panels (B1) to the mantel frame with the washer
□
head screws (II).
NOTE: We recommend attaching back panel with the screws at the corners first.
14
Attaching right leg
□
Pick up one leg (K) and attach it to the right side rail of the bottom panel (P) using two medium bolts (RR), two lock
washers (SS) and two flat washers (TT).
A1
B1
T
P
T
K
11
B1
P
K
RR
TT
SS
II
Tabla de contenido
