Vonyx ROCK300 Manual De Instrucciones página 5

REMOTE
1. STAND-BY
Use this button to put the unit into or out of standby mode.
2. MODE
Press to switch between playback modes.
3. STOP
Press to stop playback.
4. MUTE
Press to mute the device.
5. VOLUME +
Press to increase the volume.
6. PREVIOUS
Press to change to the previous track.
7. PLAY/PAUSE
Press this button to start/resume or pause play.
8. NEXT
Press to change to the next track.
9. VOLUME -
Press to decrease the volume.
10. REPEAT
Press to change repeat modes.
11. EQ
Switch to toggle sound mode between indoor- and outdoor mode.
12. NUM PAD
Numeric keyboard.
BT CONNECTION
1. Activate the BT on your device (Mobile phone, tablet etc.) which you want to play the music.
See the operating instructions for that device.
2. Press the "MODE" button and activate the BT-function.
3. Select "VONYX" on your BT device and pair.
Attention: BT distance is approx. 10meter without any barrier.
STEREO PAIRING
When having two Rock300 portable systems, it's possible to initiate a link (pairing) between the two. Both portable systems will
be emitting the same signal from the streaming audio function. To set up this stereo pairing, please follow the below steps:
1. Turn on the power on both Rock300 portable systems.
2. Change the operating mode to BT streaming on both Rock300 portable systems.
3. Press and hold the mode button on one of the Rock300 portable systems.
4. A sound will be emitted to confirm the pairing, one portable system will show "Blue" (main device), another will show "SLA"
(slave device).
5. Connect your portable device with "VONYX", the portable device will connect with the portable system showing "Blue".
When repairing after shutdown or power down of both portable systems, the pairing will be "remembered". When setting both
portable systems to BT streaming mode, they will automatically pair after about 5 seconds.
5