Idiomas disponibles
Idiomas disponibles
®
ATTENTION :
- The product is a kit (remote control and controller). The user can reprogram freely according to his needs. A single remote control can control countless controllers, but a controller
can only be controlled by up to four remotes.
- Check the installation of the battery and controller (fully discharge power), when you program after shutdown and start up.
1. Do not connect a loop greater than 5m. Use the reference case 7527 RGB amplifier to protect the RGB signal
2 - Technical data
Dimensions
120x52x20mm
Alimentation
AAA *2pcs
Materials
ABS
3 - Functions
- Hold down "on" for 2 seconds to have white lighting
- Set the desired color by sliding your finger on the
sensory ring
- Adjust the brightness by sliding your finger on the
sensitive arc
- To control all 4 zones, first press "All On"
- Associate a downlight to a remote control:
o Choose a channel from 1 to 4
o Electrically disconnect the downlight you want to associate
o Reconnect the downlight and before three seconds press once on the "on" button of
the chosen zone of the remote control
o When the association is correct, the downlight will flash three times
- Unlink a downlight from an area:
o Check on the remote control which zone is associated with the remote control
o Electrically disconnect the downlight
o Reconnect the downlight and before 3 seconds, press the "on" button of the
corresponding zone 5 times
o When the dissociation is correct, the downlight flashes quickly 6 times
- Multiple order:
You can combine multiple devices in any combination you choose. An example is
reproduced in the diagram below.
5 - Connections
Dimensions
85x45x23mm
Supply voltage
DC12V ~ 24V
Control mode
RGB 3 channels / 4 channels
Power per channel
6A
Control distance
30m
Number of programs
9
Tun on
Turn o
sensory color
ring
Brightness -
Brightness +
Speed -
Program
4 - Programmes
Press the "M" key to choose the program:
o Program 1 : red, green, blue and white
o Program 2 : red, green, blue, white, yellow, purple
Indicator
light
o Progam 3 : DISCO random color flashing
o Program 4 : red flashes three times and ranges from 0 to 100%
o Program 5 : green flashes three times and ranges from 0 to 100%
Speed +
o Program 6 : blue red flashes three times and ranges from 0 to 100%
ON/OFF
o Program 7 : random color change with group blinking
o Program 8 : fade of colors
o Program 9 : white flashes
We recommend using rechargeable batteries for the
remote control (batteries not supplied).
Recommendations:
1 - Check the power input voltage and check the polarity (+ -) of
the power input voltage
2 - Do not connect the live wires.
3 - When installing batteries, keep your finger on the contact
ring to improve its sensitivity. Once the batteries are installed,
wait 3 seconds before using the remote control.
4 - Do not use the controller in a zone with electromagnetic
disturbance.
NOTICE
R
.7655
EF
Customers service
MIIDEX FRANCE
1 rue Isaac Newton
31830 Plaisance Du Touch
FRANCE
www.miidex.com
