Idiomas disponibles
Idiomas disponibles
FITTING
• Headgear can be adjusted to fit different head
sizes. Use the ratchet in the back to hold the visor in
place and the pinlock at the top to move the visor
higher or lower on the head. (See Figure 5)
Figure 5
Ratchet
NOTE: The headgear should fit snug – tight
enough to be secure but not so tight that it is
uncomfortable.
MAINTENANCE AND STORAGE
• Store in a cool, dry place away from light and frost.
• Do not transport under heavy loads.
INSPECTION
• Regularly inspect product for noticeable scratching,
pitting or other damage to the lens or headgear.
Scratches or damage can reduce the level of
impact protection, and such product should be
replaced.
PAGE 2 OF 6
Pinlock
IMPORTANT INFORMATION
INSTRUCTIONS
CLEANING
• Clean headgear with soap and warm water.
• Lens is scratch resistant, but keep wiping to a
minimum and only use a nonabrasive cloth.
Can be cleaned with Uline Safety Glass Wipes
(Uline model # S-19310).
PROTECTION
• Protects face and eyes against high-speed particles
and high-energy impacts (190m/s), splashes and
projections of liquids, molten metal and hot solids.
• Face shield is heat resistant up to 212°F and offers
UV protection.
LIMITATIONS OF USE
• Does not protect against fine dust particles,
electrical risks, gas or infrared rays.
• Only use for purposes described above.
• Not recommended to be worn over prescription
frames.
1-800-295-5510
uline.com
0422 IS-24618
