The Front Panel - Ashdown Engineering THE EXCHANGE Manual De Instrucciones

THE EXCHANGE
USER GUIDE
POWER Please use a 9V DC Centre pin negative PSU (not included)
The pedal is provided with the following inputs and outputs:
INPUT 1 is the main master input
INPUT 2 is a secondary input
OUTPUT 1 is the master output for connection to the following
equipment (ie. an amplifier)
OUTPUT 2 is a secondary output, this is isolated for connection to a
second amplifier, or by depressing the "Bal/Norm switch can be turned
into an isolated Balanced TRS output for connection to a desk or
recording software etc.
On the rear panel is a FUNCTION switch, which the switch OUT the
footswitch toggles BETWEEN inputs 1 and 2. With the switch engaged
the footswitch turns BOTH 1 and 2 on/off.

THE FRONT PANEL

The front panel features 2 level adjusters and 2 level meters, each meter
indicates the relative level of the respective channel.
Each channel should be adjusted so that under normal usage the meter
indicates an average level of -4db. When set like this the output signal will
be the same magnitude as the input signal