Mellerware CARPI 3000W Manual De Instrucciones página 6

Check that your voltage supply is 220-240V.
8.3. E2 error: Voltage supply is too high.
Check that your voltage supply is 220-240V.
8.4. E3 error: The surface temperature
sensor is not connected or has short
circuited. Contact the authorised support
centre.
8.5. E4 error: The heat sensor of the IGBT
is not connected or has short circuited.
Contact the authorised support centre.
8.6. E5 error: The temperature of the plate
surface is too high. Please wait a few
minutes for the plate to cool down before
using it again.
8.7. E6 error: The heat sensor of the IGBT
is overheating. Decrease the power or turn
off the appliance completely to let it cool
down. Check the air exhaust to ensure there
are no blockages and air can flow freely. If
the error persists, contact the authorised
support centre.
8.8. E8 error: Internal line fault. Please
contact the authorised support centre.
9. Recycling
9.1. These electrical products, cables,
batteries, packaging, and the manual,
should not be mixed with general household
waste. For proper recycling, please take
these products to your nearest Creative
Housewares office where they will be
accepted for recycling free of charge.
Alternatively, please contact your local
authority or household waste disposal
service for further details of your nearest
designated collection point. Correct product
disposal saves resources and prevents
negative effects on human health and the
environment.
46043A_IM.indd 6 2020/11/30 15:41:40