Skywalker Trampolines SWBB1200 Manual De Montaje página 10

ASSEMBLY
STEP 7
To attach the game to your trampoline you will need to lower the two enclosure poles you will be mounting to.
(Additional poles may also need to be lowered in order to release some of the tension from the enclosure net.)
Remove the pole caps from the two chosen enclosure poles.
Helpful tip: When removing the enclosure poles, pull back on the middle of the poles!
STEP 8
11 12
Bolt Washer
(x2) (x4)
Slide the basketball hoop onto the upper tubes and align the holes of the
upper poles, basketball hoop, and the enclosure net and attach together with
the two bolts (11-1 or 11-2),four washers (12) and two nuts (13).
Note: Depending on the model of your trampoline the poles of the game may
slide into the enclosure poles rather than onto. Attachment works both ways
Nut and will not change the assembly method.
13
(x2)
Note: There are two size of bolts (11) for this step to accommodate varying
models. Please choose the appropriate one.
Socket
End cap
(3)
(12)
(13)
10
Enclosure
pole
(11)
(12)
Enclosure pole