Tabla de contenido
CONTENTS OF THE PACKAGE AND PRODUCT OVERVIEW
1. Top of the bath stand
2. N° 4 Legs
3. N° 4 Screws M5x20
4. N° 4 Hexagon nuts M5
5. N° 2 Velcro restraint straps
6. N° 1 Drainage hose
7. N° 4 Anti-slip plastic foot pads
8. N. 4 fixing pivots
BATH STAND ASSEMBLY:
1. Insert the four fixing pivots (8) of the legs in their specific locations (Fig. A), pushing them
untill you hear the click (Fig. B)
2. Fix the anti-slip plastic foot pads (7) on each leg (2) (fig.1a)
3. Insert the four aluminum legs (2) into the appropriate holes (fig.1b).
4. For each leg insert the nut (4) into the hexagon hole (fig. 2).
5. Insert the screws (3) and tighten screws to ensure proper tightening (fig. 3).
INSTRUCTIONS FOR USE:
1. Open and extend the support legs completely (2), and close the 4 locking systems on the
top of the bath stand (fig. 4.)
USE OF THE BATHTUBS ON THE BATH STAND:
1. Fix the drainage hose (6) to the bath (fig.5).
2. Insert the drainage hose in one of the holes on top of the bath stand (1) (fig. 7).
3. Rest the bathtub on top of the bath stand and secure it with the 2 Velcro restraint straps
(5) following the instructions (Figs. 7-8-9)
Note: Use the 2 central slots with Onda and Onda Evolution baths, and those on the side with
the Laguna bath.
HOW TO CLOSE THE BATH STAND AFTER ITS USE:
1. Remove the bathtub from the top of the bath stand (1).
2. Unlock the 4 locking systems (fig. 4).
3. Fold the legs (2) (fig. 10).
4. Lock the legs with the Velcro restraint strap (5) (fig. 11).
USING THE BATH STAND AS A CHANGING TABLE
In combination with the OKBABY padded changing top, code no. 884 (sold separately), the
bath stand can be used as a changing table (fig. 12).
WARNINGS!!!
•
Before using the bath tub, make sure that the legs of the bath stand are properly fixed
through the 4 locking systems positioned on top of the bath stand.
•
Do not modify the product! Any repair concerning safety parts must be done only by
specialized personnel.
•
This bath stand has been designed to sustain the weight of the bath with water and the
baby inside. Do not put any other weight on the bath stand.
•
Use this product only on even, horizontal, stable and dry surfaces.
•
Do not leave any child playing near the bath stand if unattended
•
The nonobservance of these instructions could be dangerous and cause baby drowning or
bathtub accidental falls.
•
For the safe use of the bath stand as a changing table, always use the OKBABY padded
changing top, code no. 884
CLEANING TIPS
•
Clean the bath stand with warm water and a neutral detergent.
•
Let the bath stand dry before store it in a dry and ventilated place.
Cavalletto.6
Tabla de contenido
