Before Starting Work; Assembling The Blades; Preparation; Assembly - Gardenline 46874 Manual Del Usuario

Podadera arregla setoscon batería de ión-litio de 7.2 v
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

7.2V Lithium-ion Cordless Garden Shear/Shrubber
shear/shrubber or charger when they are ready to be discarded. The
batteries can explode in a re.
Watch out for blades!
ion cordless garden shear/shrubber. Disconnect the 7.2V lithium-ion
cordless garden shear/shrubber from the power supply before
maintenance or when the cord is damaged.

Before starting work

included in the set. When charging one red LED light is on, the remaining
LEDs are off.
1. Connect the power cord plug with the charger into the charging jack on
the 7.2V lithium-ion cordless garden shear/shrubber.
2. Plug the charger into an AC outlet. Make sure that the voltage of the
electrical outlet is compatible with technical requirements.
3. When charging, the green LED turns on.
4. The recommended charging time is 5 hours 30 minutes (completely
discharged battery). The battery is fully charged when three green LEDs
are on. The 7.2V lithium-ion cordless garden shear/shrubber is then ready
for use.
5. Once charged, rst remove the charger from an AC outlet and then
unplug the charger from the charging socket on the 7.2V lithium-ion
cordless garden shear/shrubber.
Caution! When charging, the ergonomic handle heats up. This is normal.

Assembling the blades

1. Slide the cover (see Fig. 1). The shank becomes available.
Fig. 1
2. Select the appropriate blades depending on the type of task.
Wear protective gloves when replacing the blades.
3.Put the blades on the shank so that the pin ts the shank (see Fig. 2)
Fig. 2
AFTER SALES SUPPORT
1800 505 8311
USA
Preparation/Assembly
MODEL: 46874 PRODUCT CODE: 46874 04/2015
USA
-
SHANK
12
Tabla de contenido
loading

Tabla de contenido