Portable Pumping Kits
Features
Pumps fresh and sea water.
Wash down for cars, RVs, anchors and boats.
Deck shower.
Bilge or storm water emptying.
Diesel refuelling and transfer (models iL500PK and iL280PK only).
Garden watering.
Container filling and emptying.
Instructions
Immerse the complete pump in liquid. Connect the battery clips to the
battery terminals (+) positive to (+) positive and (-) negative to
(-) negative. The pump will deliver immediately. Adjust spray nozzle to
obtain required flow.
For an in-line installation unclip the filter to expose the inlet nozzle.
Connect a length of hose between the tank and nozzle. The pump must be
fitted below the tank.
No serious damage should occur to your pump if it runs dry for a short
period but its life will be increased if you ensure that it is always pumping
liquid.
Specifications
Model
Part No.:
Pump Type:
Current:
Head:
Flow rate:
Rating:
Outlets
(id hose):
Hose:
Pressure:
Pump Body:
Pump Length:
Pump Diameter:
Cable Length:
Weight:
Liquid:
Operating
Temp:
* Continuous Duty
^ Intermittent Duty - Should not be run for more than 20mins and rested
iL500
Plus
Kit
iL500PK
iL500PK-24
Centrifugal submersible / in-line portable pumping kit
12V
(6amp)
24V
(3amp)
32ft
(9.7m)
500 gph
(1920 lph)
Continuous*
3
/
(19mm)
4
13ft
lay flat
(4m)
pvc / nitrile hose
14psi
(0.96bar)
POM
6.5"
(165mm)
1.5"
(38mm)
13ft
(4m)
2.2lbs
(1kg)
Fresh & Sea Water / Diesel
176°F
(80°C)
- Should not be run dry for long periods of time.
for equal time.
iL280
Plus
Kit
iL280PK
iL280PK-24
12V
(4.5amp)
24V
(2.5amp)
32ft
(9.7m)
280 gph
(1080 lph)
Continuous*
1
/
(13mm)
2
13ft
lay flat
9ft
(4m)
pvc / nitrile hose food quality hose
14psi
(0.96bar)
POM
6.5"
(165mm)
1.5"
(38mm)
13ft
(4m)
1.8lbs
(800g)
Water systems to
176°F (
80°C)
iL200 Kit
iL200K
12V
(2.8amp)
25ft
(7.6m)
200 gph
(760 lph)
Intermittent^
3
/
(10mm)
8
&
1
/
(13mm)
2
lay flat
(3m)
14psi
(0.96bar)
HIP
5.1"
(130mm)
1.4"
(36mm)
3ft
(1m)
1.4lbs
(650g)
Fresh & Sea
Water
140°F
(60°C)