Temperature Setting; Maintenance And Cleaning - ikoo 2-Styler Jet Manual De Instrucciones

Temperature Setting:

The default temperature setting is 190⁰C. Use the + and - buttons to adjust to desired
temperature. The upper half of the wheel flashes throughout heating process and will
stop flashing when desired temperature is reached and is ready for use.
Regulate the ikoo e-styler jet between 150°C and 210°C, depending on what the
hair can handle.
Level 1: 150°C (302°F), suitable for for thin, fine and/or bleached hair
and real hair extensions
Level 2:
170°C (338°F), suitable for normal and/or wavy hair
Level 3:
190°C
Level 4: 210°C (410°F), ideal for thick, very curly, or difficult to style hair

Maintenance and Cleaning:

• Unplug the device and allow to cool down completely.
• Wipe all surfaces with a soft damp cloth.
• Do not use harsh or abrasive cleaning agents or solvents.
• Store the device in a cool and dry place.
Attention:
• There may be a slight burning smell or light smoke prior to first use, caused by residual
oil on the MCH heaters' metal parts. This is normal, harmless and the device is safe to
use and smell will only last a few seconds.
• It is important to set the appropriate working temperature for your hair
before use in order to prevent damage.
• When the ikoo e-styler jet is on, the brush can get extremely hot. Be sure to
keep away from eyes, nose, neck and facial areas.
• Remove protective plastic cover from bristles before initial use.
16
(374°F), suitable for thick and/or wavy hair