Technical Specifications; Breakdown Of Delivery Components; Diagram Of The Equipment's Measurements; Requirements Prior To Installation - Rocal Giselle 90 Manual Del Usuario

1. SPECIFICATIONS

1.1 Technical specifications

Parameter
Minimum - Maximum draught
Fuel consumption
Smoke mass flow rate
Performance
Nominal output
Power range
Average CO concentration at 13% of O2
Particle concentration
Medium draft (trial)
Net weight
Maximum authorized load (fuel)
Reload height
Logs length
Minimum flue height
Ø Flue duct
Ø Air inlet
Front safety distance
Side safety distance Back safety distance
Average temperature of smoke
Type of combustion
Flue liner
Fuel
Humidity fuel logs
Certification year
Certificate No.:

1.2 Breakdown of delivery components

(
Make sure you have all the components described below in relation to the picture on section II of the ANNEXED document)
1. Fireplace's body.
2. Chimney cap
3. Heat-resistant glove
4. Fire base plates
5. Ceiling plate.
6. Vermiculite deflector
7. Bag with screws and anchors.
8. Floor base plates
9. Cleaning cloth.
10. Documentation bag: output declaration, energy label, guarantee, technical sheet, and installation and operating
characteristics manual.
11. Tool for handling registers and opening doors.
12. Silicone tube.
13. Flue line connector.
14. Metal clamp
15. Heat-resistant spray paint for touch-ups.

1.3 Diagram of the equipment's measurements

See the ANNEXED document, section I

2. REQUIREMENTS PRIOR TO INSTALLATION

ALL LOCAL STANDARDS, INCLUDING NATIONAL AND EUROPEAN REGULATIONS MUST BE COMPLIED WITH UPON
INSTALLATION OF THE EQUIPMENT.
THE INSTALLATION MUST BE PERFORMED BY A PROFESSIONAL. FAILURE TO COMPLY WITH THIS CLAUSE SHALL
EXONERATE THE MANUFACTURER FROM ANY RESPONSIBILITY.
2.1 Ground. Make sure the ground where the appliance will be placed is able to support the weight of the device. If not, you will need
a load spreading plate for the equitable distribution of the equipment's weight. In case of doubt, please consult a specialist.
Value
11-13 Pa
4,5 kg/h
18,8 g/s
17 kW
12 - 21 kW
0,09%
24,74 mg/Nm
11,1 Pa
325 kg
5,5 kg
200 mm
400 mm
4000 mm
180 mm
120 mm
1200 mm
1200 mm 1200 mm
173º C
INTERMITTENT
NOT SHARED
NATURAL WOOD
12-20% - two years under cover
16/12241-1097
84 %
3
2016
7