CAUTION
Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging port are dry.
Instructions:
- Open the kickstand
- Switch off the item
Modello
Immagine di riferimento
Pro-I Evo
(black
and white
edition)
Pro-II Plus
Pro-II Evo
1. Switch off the scooter
and open the kickstand.
Pro-III
3. After charging, close the
waterproof cover.
To recharge the item, use the b attery charger supplied ONL Y
4. Battery charging and activation
2. Turn the Ducati logo,
open the waterproof
cover, then connect
the charger to the
charging port.
12
Istruzioni
Battery charging and activation
1. Open the rubber cap on the charging socket
on the left side of the footboard.
2. Insert the battery charger connector into the
socket.
3. When the battery is charged, remove the
battery charger connector.
CAUTION
The red light on the charger will turn green when
charging is complete.
Battery charging
CAUTION
Charge the device before the first use. We
also recommend charging it after each use
and before storing it. It is advisable to allow
the vehicle to discharge completely to prevent
damage to the battery.
CAUTION
The red light on the charger will turn green when
charging is complete.