Monogram ZDT925SPNSS Manual Del Propietário página 18

LOADING THE DISHWASHER
The 3rd rack is also removable to allow extra large items to be placed in the upper rack.
To remove the 3rd rack:
1
Remove the silverware and utensil trays. (See the
IMPORTANT NOTES in this Loading the Dishwasher
section.)
To replace the 3rd rack:
1
Extend both side rails fully out of the dishwasher.
2
Orient the rack so that its side clips are aligned and
centered with the posts on the side rail and lower the
clips onto the posts.
3
Move the rack to one side of the dishwasher until the
clips fall onto the posts.
Rack
clips
Rack
clips
Rail
posts
18
2
3
4
4
5
Rail
post
Rack
Rail
clip
6
Push the rack all the way to one side so that a gap
between it and the side rail forms on the other side.
Align the side rail posts with the center of the clips on the
rack and lift straight up.
Rail posts
on inside
of rails
Rack
clips
Rack
Rail
Push rack
to one side
Rail post
will slide
in or out
of this
opening
Continuing to hold the rack in the lifted position, repeat
on the other side.
Once the rack is removed, push the side rails all the way
back into the dishwasher.
Continuing to hold the rack in the lifted position, repeat
on the other side.
Once the rack is replaced, pull it all the way out to lock
it in place in its side rails.
Pull rack all the way
out to lock it in place
Replace the silverware and utensil trays.
Align rail posts
with rack clips -
Pull rack up
Rail
post
Rack
Rail
clip
49-4000215 Rev. 3