Tabla de contenido
Idiomas disponibles
Idiomas disponibles
You can build a route from your instrument as well :
1)
You first need to have some waypoints in your instrument. Create a waypoint on the
SYS'Nav, with menu "Navigation" (screen 7), then "Create waypoint". The instrument
will ask for a waypoint name, GPS coordinate, and
altitude (optional).
If you already have a waypoint file, you can upload it to
your instrument with the SYS PC Tool (menu
« Navigation », « Waypoints », « Send a waypoint file »). The SYS PC Tool only
accept OziExplorer file format.
Then from the SYS'Nav, go to the « Navigation » menu, then « Create route » :
2)
-
First, name your route.
-
When selecting the first waypoint, you can choose between 3 modes : « Waypoint » (a
simple waypoint), « START IN » and « START OUT » where a start time must be given.
-
When selecting the waypoint, you can setup a radius (set to 400m by default, according to
FAI rules), as well as a minimum altitude.
-
Add several waypoints..
-
You can select a « GOAL CYLINDER » or a « GOAL LINE » for the last waypoint.
-
Or select « END ROUTE » if you want to end your route with a simple waypoint.
46
EN
Tabla de contenido
