Headphone Output - Fifine K670 Guía De Usuario

6. Fully plug the provided USB cable with the right angle into the USB output at the base of
the microphone.
7. One standard screw adapter is also enclosed to ensure you can use the microphone on
current boom arm stand you may have.
8. The front of the microphone should be facing the sound source. (A VOLUME icon and blue
LED indicate the front of the microphone; the earphone jack displayed on the rear of the
microphone.)
Front Rear
5

HEADPHONE OUTPUT

670 includes a standard 1/8"(3.5mm) headphone jack for monitoring and playback.
When your preliminary setup is completed (Choose "MIC_TEST" as input), and your USB
microphone is connected to your Computer's USB port (the microphone's blue LED is
illuminated),Use 670 Headphone output to monitor your microphone recording in real-time
or tracks recordings from your computer.
Note:
* Plug earphone in the mic jack, you can hear your voice at once ,no need to set the output
devices through computer or click "listen to this device". But you will need to make this
output setting(choose the output from "Realtek High De nition Audio" option)if you want
to listen the music from the computer.
* No need to log in any recording software or operate on the computer "Listen to this device"
setting, just plug your earphone into the 3.5mm jack on the rear of microphone and you are
good to hear your own voice.
* The sound output from the 3.5mm jack on the rear microphone is louder than which
directly output from 3.5mm jack of computer. Make the test in advance as appropriate
sound level to avoid the sound heard is loud but recorded sound is low.
SPECIFICATION
Power Supply: 5V
Polar Pattern: Unidirectional
Frequency Response: 50Hz-15KHz
Sensitivity: -46±3dB(at 1kHz)
Listen music from computer
6