Liquid Vacuum Operation - Vacmaster PROFESSIONAL VK811PH Manual Del Usuario

IMPORTANT:
with the dust bag.
5. Place the power head back on the collection tank and secure it in place using the latches
(Fig. 7).
OPERATING INSTRUCTIONS: DRY VACUUMING
6. Place the large end of the hose onto the vacuum port and secure by turning clockwise until
tight.
7. Choose the desired attachment onto the free end of the hose or extension wand. To use the
round dust brush and crevice tool with an extension wand you will be required to use the metal
accessory adapter (Fig. 8 & 9).
8. Verify that the switch is in the 'O' OFF position before plugging the power cord into the power
outlet. Plug the power cord into the outlet (Fig. 10 & 11).
power cord from the outlet.
O = OFF I = ON
DO NOT USE THE HEPA CARTRIDGE FILTER AND THE MICROFIBER PRE-FILTER FOR
LIQUID VACUUMING.
DO NOT USE THE COLLECTION BAG FOR LIQUID VACUUMING.
WARNING:
MUST BE DISPOSED OF PROPERLY, PRIOR TO PERFORMING WET VACUUMING
OPERATIONS.
CAUTION:
contaminated debris in your usual trash receptacle. Place debris in an OSHA
approved bag or container marked with HAZARDOUS MATERIAL warning and

LIQUID VACUUM OPERATION

1
6
IF FILTERS ARE CONTAMINATED OR HAVE BEEN USED, THEY
2 3
7
8
4
11
5