Modes (Fig. 4)
1. Press the power button to turn the device
on or off.
2. Press the mode button to cycle between
two operating modes.
• Fan + UV (dimmed)
• Fan + UV (regular)
Fig. 4
3. Simply leave the bug trapper running in an
indoor environment. The UV light will attract
insects to the device allowing the fan to
suck them down onto the glue board.
NOTE: For best results, use in a dark
enclosed space away from strong fan or air
conditioning drafts.
Maintenance
Replacing the Glue Board
Replace the glue board with the included
replacements once it has been sufficiently
saturated with insects. Refer to Fig. 2 for
instructions on installing a new glue board.
Cleaning
1. Unplug the bug trapper then press the tray
release button to open the tray.
2. Use the included cleaning brush to clean
the funnel and tray (Fig. 5).
Fig. 5
Funnel
Power button
Mode button
Cleaning
brush
Tray
m
WARNING!
bug trapper does not require cleaning. Do not
attempt to clean the housing with water, solvents
or any other liquids.
Service + Support
If your Sun Joe
SJ-BZ15W-BLK 5W Electric
®
Bug Trapper requires service or maintenance,
please call Snow Joe
service at 1-866-SNOWJOE (1-866-766-9563)
for assistance.
Model + Serial Numbers
When contacting the company or arranging
service from an authorized dealer, you will need
to provide the model and serial numbers, which
can be found on the registration card. Copy
these numbers into the space provided below.
Record the following numbers from the registration card
of your new product:
S J
- B Z 1 5 W - B L K
5
The exterior housing of
+ Sun Joe
customer
®
®
Model #:
Serial #: