Powersmart DB2805RB Manual Del Usuario página 10

2. Insert the safety key into the slot and close the battery compartment cover as Fig 7 shows.
Fig.7
Fig.6
To Remove Battery Pack
1. Remove safety key.
2. Press and hold the battery latch button at the bottom of the battery
pack.
3. Remove battery pack from the product.
NOTICE: Make sure that the latch on the snow blower snaps into place
and that the battery pack is secured to the unit before starting operation.
To Start Snow Blower
1. Install the battery pack to snow blower.
2. Insert safety key and close the cover.
3. Press and hold on ON/OFF button, then squeeze the auger trigger and drive trigger within 3
seconds after pressing switch. Restart if over 3 seconds.
10