TECshow NAVIGATOR 3 Manual De Usuario página 8

cord to.
5. Press MUSIC/BANK COPY BUTTON (9), and the
LCD DISPLAY (3) will flash briefly to indicate the
function has been completed.
Delete Bank Of Scenes
1. Press the PROGRAM BUTTON (6) for three
seconds to activate the program mode. The
LCD DISPLAY (3) will indicate program mode by
displaying a continuous fast blinking dot next
to PROG.
2. Select the BANK BUTTON (4) you want to
delete.
3. Press and hold the AUTO/DEL BUTTON (8).
7. PROGRAMMING CHASES/EDITING
Programming Chases
You must program scenes before you can program
chases.
1. Press the PROGRAM BUTTON (6) for three
seconds to activate the program mode. The
LCD DISPLAY (3) will indicate program mode by
displaying a continuous fast blinking dot next
to PROG.
2. Select any CHASE BUTTON 1 TO 6 (5) to pro-
gram.
3. Select a desired SCENE BUTTON (2) from any
bank that has been previously recorded.
4. Press the MIDI/REC BUTTON (7) and all LED´s
will blink 3 times.
5. Repeat steps 3 & 4 as many times as you want.
You may store up to 240 steps into one chase.
6. To exit the program mode, press the PROGRAM
BUTTON (6) for three seconds. The LCD DIS-
PLAY (3) will indicate Blackout mode by dis-
playing a continuous fast blinking dot next to
BLACKOUT. You may now playback the Record-
ed Chase.
P. 8
Tecshow Navigator 3 | English version
4. While holding down the AUTO/DEL BUTTON (8)
press and hold the MUSIC/BANK COPY BUT-
TON (9) at the same time.
5. Release both buttons at the same time, and the
LCD DISPLAY (3) should flash momentarily to
indicate the function has been completed.
Delete Scene
This function will reset all DMX Channels in a single
SCENE back to 0.
1. While pressing and holding AUTO/DEL BUTTON
(8), press and release the SCENE BUTTON (2)
1-8 you want to delete.
Editing Chases
Insert a step
1. Press the PROGRAM BUTTON (6) for three
seconds to activate the program mode. The
LCD DISPLAY (3) will indicate program mode
by displaying a continuous flashing light next to
PROG.
2. Select the CHASE BUTTON 1 TO 6 (5) you wish
to add a step to.
3. Press and release the TAP SYNC/DISPLAY BUT-
TON (11), and the LCD DISPLAY will now show
the step you are now in.
4. After selecting the TAP SYNC/DISPLAY BUT-
TON (11) use the UP and DOWN BUTTONS to
manually roll to the STEP you wish to insert a
step after.
5. Press MIDI/REC BUTTON (7) the LCD will show
one step number higher.
6. Press the SCENE BUTTON (2) you want to
insert.
7. Press MIDI/REC BUTTON (7) again to insert
new step.