3. Insert two Wood Dowels (3) into the inner holes of the Middle Crossbar (L). Tap it in with a rubber
mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.
4. Align the drilled holes on the Fixed Shelf (B) with the inserted Wood Dowels (3) on the Middle
Crossbar (L), and then press them together. Attach the Middle Crossbar (L) in place by engaging three
Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
Assembly Instructions
L
3
Cam Lock
(3 used in this step)
①
1
3
B
Wood Dowel
(2 used in this step)
7
③