Safety Instructions; Electrical Safety; Description (Fig. A) - Promaker PRO-SC400 Manual De Usuario

WARNING:
Read this manual carefully before
using the machine, for your own safety.

SAFETY INSTRUCTIONS

When using the machine, always
observe the
instructions as well as the additional
safety instructions. The following
symbols are used throughout this
manual:
Denotes risk of personal injury
or damage to the tool.
ADDITIONAL SAFETY INSTRUCTIONS
FOR JIG SAWS
• Make sure that the saw blade is
mounted correctly before use.
• Make sure that, when in use, the
guard is pressed down as far as
possible.
• Never load the machine so much
that the motor is coming to a standstill.
• Never try to brake the saw blade after
the machine has been switched off.
• Use original accessories only.

ELECTRICAL SAFETY

Always check that the power
supply corresponds to the voltage
on the rating plate.

DESCRIPTION (fig. A)

Your jigsaw has been designed for
sawing wood, metal and plastics.
enclosed safety
1. On/off switch
2. Lock button
3. Speed adjusting wheel
4. Safety guard
5. Saw blade holder
6. Shoe
7. Allen key holder
8. Dust extraction connector
Mounting saw blades (fig. B)
The opening in the saw blade holder
(4) must be clean and free from saw
dust.
• Loosen the set screws (10).
• Slide the saw blade up to the stop
in the saw blade holder (4). Make
sure that the back of the saw blade
engages in the slot of the guide roller
(11).
• Tighten the set screws (10) firmly.
The set screws (10) may loosen
during use by vibration and damage
the saw blade. Regularly check that
the saw blade is fastened firmly and
if necessary fasten the set screws.
Only carryout this inspection when the
machine has been switched off, the
plug has been removed from the wall
socket and the saw blade has come to
a stand still!
Sharp saw blades produce the best
result. Replace worn saw blades on
time by new ones. Remember that
continuous use of worn saw blades
reduces the accuracy of the machine
and may lead to overloading the
motor!
4