Display Devices - XMG FOCUS 15 Guia Del Usuario

Display Devices

Note that you can use external displays connected to the
HDMI-Out port and/or Thunderbolt 4 port and/or Mini
DisplayPort. See your display device manual to see which
formats are supported.
Configuring the Displays in Windows
All external and internal displays (up to 4 active displays)
can be configured from Windows by using the Display or
System (in Settings) control panel or the Project menu.
To configure the displays using the Project menu:
1. Attach your external display(s) to the
appropriate port, and turn it(them)
on.
2. Press the + P (or Fn + F7) key
combination.
3. Click on any one of the options from
the menu to select PC screen only,
Duplicate, Extend or Second
screen only.
4. You can also click Connect to a
wireless display at the bottom of
the Project screen and follow the
steps to connect to any wireless
enabled display.
22
To configure the displays using the Display control panel:
1. Attach your external display(s) to the appropriate port, and turn
it(them) on.
2. Right-click the desktop and select Display settings from the
menu.
3. Click the Detect button.
4. The computer will then detect any attached displays.
5. You can configure up to 4 displays from the Multiple displays
menu.
Figure 15
Project
Note that when 4 displays are connected, only 2 displays
may be configured in Duplicate mode.
Figure 16 - Display (Multiple displays)

4 Connected Displays