Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Using the template guide
The template guide
can be used in
various ways:
- Producing duplicates
of a particular design
of an original shape.
-In conjunction with
a template, producing
decorative features.
-Repetitive cutting shapes.
If you wish to make your own templates it is
best to use a hardwood such as plywood. Use
a piece that is just thicker than the depth of the
template guide. Allow for the thickness of the
guide in your template to ensure that the work
piece is cut to the correct size.
1.To attach the
template guide (16)
turn the router upside
down and remove the
two fixing screws in
the centre of the
router base.
2.Insert the template
guide into the base of the router and secure
using the two fixing screws.
Maintenance
WARNING. Always ensure that the tool is
switched off and the plug is removed from the
power point before making any adjustments or
maintenance procedures. Always wear sturdy
gloves when handling or changing bits as they
can be very sharp.
Cleaning
1. Keep the tool's air vents unclogged and
clean at all times.
2. Remove dust and dirt regularly. Cleaning is
best done with a rag.
3. Re-lubricate all moving parts at regular
intervals.
4. Never use caustic agents to clean plastic
parts.
CAUTION. Do not use cleaning agents to clean
the plastic parts of the router. A mild detergent
on a damp cloth is recommended. Water must
never come into contact with the router.
Power cord maintenance
If the supply cord needs replacing, the task
must be carried out by the manufacture, the
manufacturer´s agent, or an authorised service
centre in order to avoid a safety hazard.
Repairs
Only an authorised service centre should
replace the cordset or effect other repairs.
10
Tabla de contenido
