Boiler Thermostat; Heating Power; Summer-Winter Menu; Chrono Menu - Vertex Life GAIA HIDRO 16 Manual De Instrucciones

5.2.2.1. BOILER THERMOSTAT

Press P3 button to enter submenu. To change the boiler
thermostat level, press
max.75-min 50. Use P3 to save.

5.2.2.2. HEATING POWER

Press P3 button to enter submenu. Use
of the blower fan. Ex: 1 - 2 - 3 - 4 - 5 - 6 - A (A = Auto Blow) Use P3 button to register

5.2.2.3 SUMMER-WINTER MENU

Press P3 button to enter submenu. With the P4 and P6
can select the winter mode and with the
exit. (Summer mode only applies if there is a hot water boiler system.)
5.2.3 REMOTE CONTROL MENU
Remote control is not available

5.2.4. CHRONO MENU

Press the P3 button to enter the menu. The screen shows the chrono management
menu. Enter the mode menu by touching the
will appear. In the chrono menu, the daily/weekly/weekend time settings are usually
on/off. When turned on, the display will show the time in the left corner and nothing
will be visible in the closed position. When the P2 button is pressed in the mode menu,
the timer can be set to ON or OFF. To select the daily, weekly or weekend programming
and set the clock, the timer menu must be entered with the P3 button. When
programming is required, the steps in the following table should be followed. For each
day, 3 slot openings and 3 slot stops can be programmed. To set each time interval,
use the P3 menu button to flash the time interval on the display and the P4 and
P6 buttons to increase or decrease the time.
After choosing the time slot selection, activate it with
activated, there will be a "√" sign on the right side. Use
to save and use P1 ESC to exit each step.
Example: DAILY SCHEDULE
P4 and P6. It can be set to
P3 button you can save it. Use P1 ESC to
P4 and P6 to change the values
P3 button. The screen to the right
OFF
Daily
Weekly
Weekend
buttons you
P5 button (when
P3 menu button