Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Points of Attention
1. For your protection, inspect the welding helmet for damage or defect before every use and follow the
warning instructions in this manual. Failure to do so may result in serious and permanent injury.
2. Avoid hard contact to the helmet to avoid damage to the ADF.
3. The outer protection plate of helmet should be periodically inspected and cleaned, keep it clear of dust
and dirt. In case of a break, crack, pitting or other serious damage, the plate must be replaced.
4. In order to operate more efficiently and safely, please select correct dark shade number.
5. The ADF is not waterproof. Do not submerge the ADF in water.
6. Be sure that the welding light is received completely by sensor, if not, the filter may not fully darken,
resulting in possible injury.
7. Please use the automatic filter at a temperature between
-10°C-65°C (14°F-149°F )
8. Please don't disassemble the filter, if any problems arise, please contact a SureWerx customer service
represntative.
9. ADF replacement.
Packing List
Mask body (including control cassette)
Headband
Operation manual
4
push up
1
2
pull down
3
slide down
1 piece
1 piece
1 piece
Tabla de contenido
