Specification Sheet - Focus - Ki Mobility Focus CR Manual De Instrucciones Y Garantía

VIII. SPECIFICATION SHEET - FOCUS
Manufacturer: Ki Mobility
Address: 5201 Woodward Dr., Stevens Point, Wi 54481
Model: Focus CR
Standard
Measurement
Reference
ISO 7176-5 Overall length with leg
8.2 rest (Std or SRC)
ISO 7176-5 Overall length with leg
8.2 rest (MDC/MAC)
ISO 7176-5
Overall width
8.3
ISO 7176-5 Handgrip Height
8.4 (SRC/MDC)
ISO 7176-5 Folded Length
8.5 (SRC/MDC)
ISO 7176-5 Folded Width
8.6 (SRC/MDC)
ISO 7176-5 Folded Height
8.7 (SRC/MDC)
ISO 7176-5
Rising
8.8
ISO 7176-5
Total Mass
8.9
ISO 7176-5 Mass of the heaviest
8.10 part
ISO 7176-5 Turning Radius
8.13 (SRC/MDC)
Required width of
ISO 7176-5
angled corridor
8.15
(SRC/MDC)
Required doorway
ISO 7176-5
entry depth
8.16
(SRC/MDC)
Required corridor
ISO 7176-5
width for side opening
8.17
(SRC/MDC)
ISO 7176-1 Static stability
8 downhill
ISO 7176-1
Static stability uphill
9
ISO 7176-1 Static stability
10 sideways
ISO 7176-1 Static stability with
11 anti-tips
This wheelchair conforms to the following standards:
a) Requirements & test methods for static, impact and fatigue strengths (ISO 7176-8 and ISO 7176-30 as
applicable)
b) Requirements for resistance to ignition in accordance with ISO 7176-16
See General Warnings section of manual for further information on flammability.
Disclosure Information (ISO)
Fixed or Maximum
minimum value, if
value relevant
1025 mm - mm
40.4 in - in
- mm - mm
- in - in
640 mm - mm
25.2 in - in
1100 mm - mm
43.3 in - in
790 mm - mm
31.1 in - in
560 mm - mm
22.0 in - in
650 mm - mm
25.6 in - in
51 mm - mm
2.0 in - in
25 kg - kg
55 lb - lb
- kg - kg
- lb - lb
765 mm - mm
30.1 in - in
864 mm - mm
34.0 in - in
1029 mm - mm
40.5 in - in
914 mm - mm
36.0 in - in
>10° >12°
>9° >11°
>8.5° >8.5°
>10° >10°
50
Maximum Occupant Mass: 136 kg, 300 lb
Occupant Mass Group (I, II or III): III
Standard
Measurement
Reference
ISO 7176-1 Did anti-tip device prevent chair
11 from tipping over?
ISO 7176-3 Max Slope
7.2 Uphill/Downhill
Brake
ISO 7176-3
Operating
6b
Force
Lever
ISO 7176-
operating force
30 5.10
(tilt/recline)
Reclining back
ISO 7176-
adjustment
30 8
force
ISO 7176-7 Seat plane
7.3.2 angle
ISO 7176-7 Effective seat
7.3.3 depth
ISO 7176-7 Effective seat
7.3.5 width
ISO 7176-7 Seat surface
7.3.6 height at front
ISO 7176-7
Backrest angle
7.3.7
ISO 7176-7
Backrest Height
7.3.8
ISO 7176-7 Footrest to seat
7.3.12 distance
ISO 7176-7 Leg to seat
7.3.16 surface angle
ISO 7176-7 Armrest to seat
7.3.17 distance
Front armrest to
ISO 7176-7
backrest
7.3.18
distance
Front location
ISO 7176-7
of armrest
7.3.23
structure
ISO 7176-7 Handrim
7.3.24 diameter
ISO 7176-7 Horizontal
7.3.26 location of axle
Fixed or Maximum
Dim.
minimum value, if
No.
value relevant
Yes
N/A >12° - °
60 N - N
N/A
13.5 lb - lb
- N - N
N/A
- lb - lb
- N - N
N/A
- lb - lb
(1) -5° 50°
450 mm - mm
(2)
17.7 in - in
400 mm - mm
(4)
15.7 in - in
435 mm - mm
(5)
17.1 in - in
(6) 0° 50°
500 mm - mm
(7)
19.7 in - in
420 mm - mm
(11)
16.5 in - in
(15) 100° - °
240 mm 354 mm
(16)
9.4 in 13.9 in
400 mm - mm
(17)
15.7 in - in
290 mm - mm
(22)
11.4 in - in
446 mm - mm
(23)
17.6 in - in
13 mm - mm
(25)
0.5 in - in
Yes No N/A
X
X