Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Mirror installation
Measure the different distances corresponding
to the height with respect to the basin and the
screws to hold the mirror. Using a level, mark
where the mirror couplings will be needed.
Before hanging up the mirror, unscrew the box
on the mirror cable. In this, each of the cables
coming from the point of light of the wall will be
hooked.
ASSEMBLY
Drill the marked points and place the studs on the
wall. Then place the couplings where the mirror will
hang.
They will be inserted into the dowels, screws or
hooks. To make sure that it is properly leveled,
check again with the level.
Finally hang the mirror on the wall and turn on the
light network to check its proper operation.
Tabla de contenido
