Symbols; Tool Specifi Cations; Specifi Ed Conditions Of Use - Protool RHP 18 PLUS Manual Original

Hammer drill RHP 18 PLUS -
original instruction
Table of contents
1 Symbols ................................... 12
2 Tool Specifi cations ...................... 12
3 Specifi ed Conditions of Use ......... 12
4 Operating Controls ..................... 13
5 General Safety Rules .................. 13
5.1 Work area ................................. 13
5.2 Electrical safety ......................... 13
5.3 Personal safety .......................... 13
5.4 Power tool use and care .............. 14
5.5 Service ..................................... 14
5.6 Sliding clutch ............................. 14
5.7 Residual risk .............................. 15
5.8 Emission levels .......................... 15
6 Activation ................................. 15
6.1 Additional handle ....................... 15
6.2 Depth stop ................................ 15
6.3 Switching on/off ........................ 15
6.4 Speed control ............................ 15
6.5 Rotational direction switching ...... 16
6.6 Selecting the modes of operation ... 16
7 Inserting / Removing tools ........... 16
7.1 Inserting tools ........................... 16
7.2 Removing tools .......................... 16
8 Accessories ............................... 17
8.1 Screw adapter assembly ............. 17
8.2 Thread chuck ............................ 17
8.3 Tool chuck CENTROTEC ............... 17
9 Practical tips .............................. 17
10 Maintenance .............................. 17
11 Environmental Protection /
Disposal.................................... 18
12 Warranty .................................. 18
13 Declaration of Conformity ............ 18
12
GB
1

Symbols

Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Wear a dust mask!
Read the instructions
Not to be included in municipal refuse
Drilling / Stirring / Screwing
Impact drilling
Advice or tip
►
2

Tool Specifi cations

Voltage
Frequency
Input power
No-load speed
Impact rate, max.
Impact energy
Right / Left rotation
Safety clutch
Clamping collar dia.
Tool holder
Drill dia., max.
Steel
Wood
Hammer drilling
in concrete
Weight
Protection class
3 Specifi ed Conditions
of Use
The hammer drill is intended for universal
use for impact drilling in concrete, brick and
stone. It is also suitable for drilling without
impact in wood, metal, ceramic and plastic.
230 - 240 V
50 / 60 Hz
550 W
0 - 1450 min
-1
5790 min
-1
1.7 J
•
•
43 mm
SDS-plus
13 mm
25 mm
18 mm
1.7 kg
II /