Tabla de contenido
Assembly
Harness
• Set both suspenders over the shoulders.
• Insert the left suspender plastic bushing (1) into the
orifice of the right suspender.
• Insert the side leash (2) into the plastic bushing.
• Secure the system inserting the pin (3) in the plastic
bushing.
1
2
3
Gas Brushcutter Balance
• Set and fasten the harness to be firm and comfortable.
• Join the harness to the harness ring in the Gas
Brushcutter straight axis.
• Pull the ring upwards and downwards until the Gas
Brushcutter is balanced with the cutting head pointing
down, below your waist level and no more than 30" from
the ground.
• When using the spool, the cutter head shall touch
slightly the ground (A).
• When using a blade or circular saw, the cutter head shall
be approximately 8" above the ground (B).
A
B
8"
8
ENGLISH
Tabla de contenido
