smartmi VortexWave Manual De Usuario página 18

Power-on/Power-off/Pause/Startup
Long press for 3 seconds. The robot will enter the power-on state, and the
power indicator and recharging indicator will breathe in green. After the robot
has been powered on, it will enter standby state and the power indicator and
recharging indicator will remain green. When you short press
start cleaning.
When the robot is stationary (not charging), you can power off by long
pressing for 3 seconds.
During the cleaning process, if you short press
cleaning.
If the robot remains stationary (not charging) and idle for more than 10 minutes,
it will enter sleep state. In the sleep state, you can wake up the robot by short
pressing any button. If the robot is in the sleep state for more than 30 minutes and
has no task to perform, it will automatically power off (without a voice prompt).
Tips:
The robot cannot be powered off during charging.
When the wastewater tank fills up during cleaning, the robot will wait in place for 90 seconds. If the user
does not operate the robot after 90 seconds, the robot will automatically return to the charging base or
startup position.
When cleaning for the first time, stay with the robot while it functions in order to deal with any minor
issues that may arise. Following the first cleaning, the robot will create a map. For areas that do not
need to be sprayed with water or where the robot may get stuck, use the Mi Home app to set restricted
areas for the robot to bypass during cleaning.
, the robot will
, the robot will pause the
13
Recharging/Self-cleaning
When the battery is low during
cleaning or after cleaning
is completed, the robot will
automatically return to the charging
base for self-cleaning and charging.
When you short press
or standby state, the robot will return
to the charging base for self-cleaning
and charging.
When you long press
or standby state, the robot will return
to the charging base for charging
without self-cleaning.
During recharging, short press any
button to pause the recharging task.
When the robot is in the charging
base, short press to start or cancel
the self-cleaning task.
in the pause
in the pause