At the end of the life of the gas stove, it must be respected the environment complying with local regulations
regarding the disposal of waste and, where possible, to implement the separate collection of product's
materials following the instructions below.
Catalytic Model – Catalytic model with fan heater composition:
Mixed Metal components
Plastic materials
Ceramics components
Disassembly and separation instructions for disposal of different materials
8
Remove the rubber hose by unscrewing the metal clamps
9
Remove the round control knob with the aid of a plier,
10 Unscrew the locking nut of the valve
11 Detach the command group in plastic material levering from below.
12 Unmount the four wheels of plastic material with the aid of big screwdriver pulling down
13 Pull of the protective grid
14 Take off the catalytic panel and remove the ceramic fiber with gloves .
ERC (European Waste Catalog)
17 04 07
17 02 03
17 06 04
The Catalytic Panel is made of alkaline earth silicate (AES Wool), these products are inert materials that
remain stable over time. No harmful effects, caused by these products , are recorded on the environment.
According to Directive 67/548 / EEC, this fiber is a mineral wool belonging to the group of "vitreous synthetic
fibers (silicates) with a random orientation with an alkaline earth oxide content of more than 18% by weight" .
The indicated fibers are not classified as irritating to the skin and are exempted from the classification of
carcinogens because the bio persistence (measured according to the EU protocol ECB / TM / 27 rev.7) in the
pulmonary tissues is low. They are unclassified and do not require labelling under the CLP regulation
INFORMATION ON DISPOSAL AND RECYCLING
DO NOT DISPOSE THIS PRODUCT AS UNSORTED URBAN WASTE
THIS PRODUCT MUST BE DISPOSED AT THE NEAREST
mixed metals
plastic
Ceramics components different from classification number: 17 06 01 and 17 06 03
WASTE SORTING CENTER.
80% (c.a. 10,9 kg)
6,7% (c.a. 0,9 kg)
13,6% (c.a. 1,8 kg)
: