Controlling A Ptz Camera; Ptz Control Panel - TruVision TVN-1208S-2T Guía Del Operador

Icon Description
Instant Playback: Playback the recorded
video from the last five minutes. If no
recording is found, then there was no
recording made in the last five minutes.
Select the desired camera and click the icon
to start playback.
Digital Zoom: Enter digital zoom.
PTZ Control: Enter PTZ control mode.
Audio On: Enable/Disable audio output. The
stream type must be set to Video/Audio.
Switch Stream: Switch between main stream
and substream. It also shows the current
stream, the actual bit rate, and the frames per
second.

Controlling a PTZ camera

When in live view you can quickly call up the list of
existing presets, preset tours, and shadow tours by
using the mouse or keypad. You can also control the
movement of the PTZ camera.

PTZ control panel

Name
1 Configure PTZ
settings
2. Directional
pan/auto-scan
buttons
3. PTZ movement
2
Description
Open the PTZ Parameter Settings
menu to configure PTZ.
Controls the movements and
directions of the PTZ. The center
button is used to start auto pan by
the PTZ dome camera.
Adjusts the speed of PTZ
movement.
Name
Zoom, focus, and
4.
iris
5. Select PTZ
command
Playback
The recorder lets you quickly locate and play back
recorded video.
Name Description
1 Playback mode Select Normal or Event playback.
Note: Multiscreen selection is only
available in normal mode.
2. Camera panel Select the camera(s) for playback.
Use the mouse to click on the
vertical scroll bar to display the list
of cameras available.
3. Playback viewer
Multi-camera Select which cameras to display
4.
selection simultaneously when in normal
mode. It can be one camera or a
group. The maximum number of
cameras that can be displayed will
depend on the recorder model.
Playback Select the playback period to
5.
period display for the selected day: 24-
hour, 6-hour, 2-hour, 1-hour, or 30
minutes.
Default is 24-hour playback.
TruVision Recorder Operator Guide
Description
Adjust the zoom in
and out.
Adjust the focus in
and out.
Adjust the iris in and
out.
Displays the desired function from
the scroll bar:
Preset: Presets are previously
defined locations of a PTZ dome
camera. It allows you to quickly
move the PTZ dome camera to a
desired position.
Preset Tour: This is a defined
series of presets.
Shadow Tour: Allows you to
record a manual movement of a
PTZ and to follow the same tour
later.