Uline H-9022 Instrucciones De Asamblea página 3

6. Install exterior shelves to desired height on outer
supports by placing shelves onto outer support
louvers. (See Figure 6)
7. Install inner cabinet shelves to desired height on
cabinet supports by inserting four short Phillips head
bolts and four 5 mm locknuts. (See Figure 7)
Figure 7
8. Attach top by placing over cabinet supports and
outer supports. (See Figure 8)
NOTE: Lip on underside of top should go on
same side as cabinet supports.
Figure 8
PAGE 3 OF 12
ASSEMBLY CONTINUED
9. Attach handles to desired side of cart by inserting
eight short Allen head bolts through handle, long
shelf lip and top shelf. (See Figure 9)
Figure 6
Louver
10. Attach short shelf lip to both sides of cart using two
short Allen head bolts per shelf lip. (See Figure 10)
11. Insert six short Allen head bolts into remaining bolt
holes on the top.
NOTE: It is recommended to put handles on
cabinet side of cart.
Figure 9
NOTE: For a full lip on the top shelf, attach two
short shelf lips and one long shelf lip using 12
short Allen head bolts.
Figure 10
1220 IH-9022