Jimmy H10 Pro Manual De Instrucciones página 15

Warning reminding
1.When air path is clogged or dust cup is full,
LCD screen will remind to clean dust cup
and filter as below pictures. There is also voice
reminding.In this status, if product is working
in Max mode, it will automatically switch to Eco
mode until the clog is cleaned.
2.If floor head needs cleaning, LCD screen
will display brushroll and air patch cleaning
reminding.There is also voice reminding.
Continue to use will activate brushroll stall
protection and product will stop working.
Product will resume working after blockage is
cleaned.
3.If the dust content circles on LCD screen are
always red, dust sensor might be covered by
dust, please clean the dust on the dust sensor
which is located in the suction inlet of the
handheld vacuum cleaner.
4.When there is electric components
defect,which needs professional after service
person for instruction or repairing, LCD screen
will display the defect warning with error code
of F1 to F8. Please contact after service of
local agent and provide error code.
21
22
23
2pcs Dust sensor
24
13