Taurus Chanson 18 Manual De Instrucciones página 7

Wine Cooler
Chanson 18
Chanson 24
 DESCRIPTION
- A Door
- B Power cord
- C Shelves
- C.1 Superior shelf
- C.2 Second shelf
- C.3 Third shelf
- C.4 Fourth shelf
- C.5 Fifth Shelf
- C.6 Display Shelf
- D Control Panel
- E.1 Lock button
- E.2 Light / Unit button (ºF, ºC)
- E.3 Display
- E.4 Increase temperature button
- E.5 Decrease temperature button
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
 INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- During transportation, the tilt angle of the
appliance must not exceed 45 °. Do not locate the
appliance upside down as this may damage the
compressor.
- Respect the legal provisions concerning safety
distances from other elements such as pipes,
electrical connections, etc.
- Ensure that the appliance is level with respect to
the floor.
- The appliance requires suitable ventilation in
order to work properly. Leave a space of 7 cm
above the appliance, 7 cm behind the appliance,
and 7 cm on either side.
- The plug must be easily accessible so it can be
disconnected in an emergency.
ENGLISH
USE AND CARE:

- Do not use the appliance if the on/off switch
does not work.
- Do not use the appliance if it is tipped up and do
not turn it over.
- Store this appliance out of reach of children
and/or persons with physical, sensory or reduced
mental or lack of experience and knowledge.
- If for any reason the appliance is on fire,
immediately disconnect it from the mains, ensure
there is no presence of air currents that could
stoke the fire and put out the flames with the help
of a lid, or other nonflammable items, NEVER
using water.
- This product is intended to be used exclusively
for the storage of wine.
- This refrigerating appliance is not suitable for the
freezing foodstuffs.
- The wine cooler is recommended to be
designed at 12°C.
- The shelves placed in factory mode is the most
efficient use of energy for the refrigerating
appliances.
- The following combination of shelves is
recommended for energy to be used as efficiently
as possible by the refrigeration unit.
- When the surrounding temperature is 25°C and
the wine cooler has no bottle loaded, it will take
around 30 minutes to increase the wine cooler's
temperature from 5°C to 12°C. Under the same
circumstance, it will take around one hour to
decrease the wine cooler's temperature from 12°C
to 5°C. The less the temperature span is, the less
time it will take
- The wine cooler is recommended to be
designed at 12°C.The energy consumption is
0.329kWh/24h(WC18C) / 0.389kWh/24h(WC24C).
- If the setting temperature is higher than 12°C,
the energy consumption will be lower. If the setting
temperature is lower than 12°C, the energy
consumption will be higher.
 INSTRUCTIONS FOR USE
BEFORE USE:
- It is recommended that you wait for a minimum
of 2-3 hours after having installed the appliance
before you use it for the first time, leaving the front
cover open.