Tabla de contenido
Start up with a hot motor
• Set the grass trimmer on level ground where the blade
or spool will not make contact with any obstacle.
• Set the switch into the ON position (A).
• Press simultaneously the trigger release (D) and the
throttle trigger (E).Keep the trigger depressed.
• Pull the starter handle (G) to start the motor.
• Press and release the throttle trigger to set the motor
idle (K).
Turning off
• Press and hold the switch into the OFF position (E) until
the motor stops.
E
CAUTION
• Remember, you as the grass trimmer
operator is responsible of your own safety as well as
people close to the work area. Follow all safety warnings
(pages 4 and 5) before operating the grass trimmer.
• Keep a balanced stance with both feet firmly set onto the
ground.
• Hold the grass trimmer firmly in front of you; one hand
holds the handle and the other holds the auxiliary handle
so that the grass trimmer is aligned to your body and
pointing the cutter head 30° downwards, away from your
feet.
DANGER
• Do not start the grass trimmer in a
different position.
• Turn ON the grass trimmer and cut from left to right
rotating your waist and keeping the grass trimmer
position.
• As the cut is performed, the cutting line wears out and
will be detached. To release more line from the spool,
press the grass trimmer slightly downwards. The ground
will depress the retention cap against the spool and will
release more line. The guard blade will cut the remaining
line. Then, stop pushing the grass trimmer against the
ground to save line lengths.
• To cut brush or grass, cut gradually. Do not try to cut in
one movement from the base because the residues may
clog the cutting head or can go out of control from the
operator.
10
ENGLISH
Turning on
A
E
D
F
G
K
Operation
30°
B
x10
Waist
Rotation
Cutting
movement
Tabla de contenido
