Corsair iCUE H100i ELITE Manual Del Usuario página 12

CONNECT FANS TO PUMP AND PUMP TO MOTHERBOARD
> Connect pump tach cable to the CPU_FAN header on your motherboard (Figure 1).
> Connect each fan to the USB-C Wire Harness and connect the USB-C cable to the pump (Figure 2).
CONNECT PUMP TO USB AND SATA POWER
> Using the included USB-C cable, connect the iCUE ELITE Series cooler to a motherboard
USB 2.0 header.
> Connect pump power cable that is attached to the USB-C Wire Harness to an available SATA power
plug from your power supply.
ENGLISH
3-PIN
Figure 1
10
Figure 2