Initial Setup - Crosley Parker CR3503A Manual De Instrucciones

English
1. Mute Button
2. Power Button
3. Volume Up Button
4. Stop Button
5. Play/Pause Button
6. Backward Skip Button
7. Volume Down Button
8. Number Button
9. Mode Button
10. Repeat Button
11. Forward Skip Button

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect the Speakers to the Speaker Jacks on the back of the unit.
3. Connect AC adaptor to the Power Jack of the unit.
4. Press the Power Button to turn on the unit.
Note:
• Do not plug the AC power adaptor to power outlet before all the assembly is completed.
Before turning the power on, make sure again all the connection settings are correct.
Always turn off the power when connecting or disconnecting.
• Power button must be pushed in on unit to power on/off with remote. A red standby
indicator light will appear on screen when powered off with remote.
Line Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, connect the 3.5mm auxiliary cable (not included) between
your audio device, and the Line In Jack of this unit, press the Mode Button until
Line In Mode is selected and start playing the music.
1. To pause the playback, short press the Pause button.
5