Parts; Start Up; Battery Charge - Truper DIMI-20A Manual

Tabla de contenido
Cross tip
Battery
charger

Battery charge

1. Plug the charger plug into a 127 V~ outlet (The
green charging indicator light will turn on).
2. Insert the battery into the charger by sliding it
into the charger as shown in the picture. The green
light will turn off and the red light should turn on,
indicating that charging has started.
• When the battery is fully charged, the green light
will turn on and the red light will turn off.
• Disconnect the charger from the power supply
when charging is complete.
• If the red-light flashes, the battery is defective,
replace it with a new one.
• If the green light flashes, the battery temperature
is lower than 32 °F or higher than 113 °F. Wait until
the battery temperature is in the correct range
before charging.
6
ENGLISH
Tip holder
Tip holder
collar
Direction of rotation
locking button
Battery connection prongs

Parts

LED
light
and
Switch
Battery
release
button
Charge
indicator
Battery

Start Up

2
Battery level
indicator
Handle
Belt clip
1
Tabla de contenido
loading

Este manual también es adecuado para:

101606

Tabla de contenido