• The light bulb holder size is E27. Unscrew the light bulb from the lamp to remove
and replace it with a new one.
The shade (4) is intended for clear, white-light bulbs and IR bulbs with a maximum
power rating of 250 W.
3.4. Cleaning and maintenance
a)
Before cleaning, adjustment or replacement of accessories, and when the
appliance is not in use, unplug it from the mains and wait until it cools down
completely.
b)
Use non-corrosive agents for cleaning the surfaces only.
c)
After each cleaning, dry all components well before the appliance is used
again.
d)
Do not spray the appliance with a stream of water and do not immerse it in
water.
e)
Regularly inspect the appliance for technical defects and damage.
f)
Clean with a soft sponge and mild soap. Rinse with clean water and wipe dry.
g)
Do not clean with any sharp and/or metal implements (e.g. a wire brush or a
metal scraper) as these may damage the surface of the appliance.
DISPOSAL OF WASTE APPLIANCES
At the end of its service life, this product must not be disposed of with mixed
household waste; return it to a collector/recycler of waste electrical and electronic
equipment. This is shown by the symbol placed on the product, the user manual or
the packaging. The materials used in the appliance can be reused according to their
classification identifications. By reuse, recycling or applying other forms of use of
waste appliances, you make a significant contribution to the protection of our
environment.
Local administration will provide you with the information about the nearest
disposal locations for the appliance.
TROUBLESHOOTING
Problem
The appliance
does not work.
Possible cause
The appliance is not turned
on.
Power cord/cable failure.
The light bulb is not screwed
all the way in or has failed.
Action
Make sure that the
appliance is properly
connected to the mains and
turned on.
Have an electrician repair
the failure.
Screw it all the way in or
replace.