Symbols; Operating Instruction - MaxPro PROFESSIONAL MPBVC1200/20 Manual De Instrucciones

*Do not collect sharp objects.
*Do not collect objects which can easily stick to the filter such as calcareousness powder, gesso and
graphite powder. Because they will block the ventilation and damage motor.
(5) Do not overturn the machine in case water goes into the motor and damages it.
(6) Warning: If water is out from air outlet mouth, do not overturn the machine when being repaired
in case water goes into the motor and causes damage. Do not use this machine as pump in case of
damaging the motor.
(7) Remember to turn off the machine and remove the plug each time after using or under repair.
(8) Keep machine away from strong sunlight and high temperature in case plastic is distorted.
(9) Do not wrest, tramp, or haul hose in case of damaging it.
(10) Do not immerse the barrel cap into the water or wash with water in case water goes into the e
lectrophorus parts and causing person injury.
The correct way should be: immerse the dishcloth firstly, and then dry it. Finally, wipe the dirty
part gently.
(11)The power cord must be replaced by the designated repairing center or professionals.

SYMBOLS

Read the manual
Warning

OPERATING INSTRUCTION

(1)Connection
Insert the hose connector into the
air inlet and turn it clockwise.
(2)Blowing function
Insert the hose connector into the blowing mouth as it's shown in the picture when you want to
use the blower.
4
Wear dusk mask
Do not dispose of old appliances in the
household garbage
Disconnect from power supply while
maintance
Turn the connector anticlockwise, and
pull it out for unlock.
GB
(3)Filter-cleaning function
The airflow will come in through the space in head, and hit the filter for shaking the dust down.
It'll efficiently avoid block and clean the surface of the filter.
(4)Power socket (*For MWD191S-1200W-30L)
When this model is plugged in, the socket works as a power supply.
You can connect an appliance to it for cable-extending purpose.
(5)Stages of the switch
Press ' I ': The device is turned on.
Press ' 0 ': The device is turned off.
Press ' II ': This stage is only used when the other electric item is connected to this device.
( *For MWD191S-1200W-30L)
(6)Handle with airflow adjustment
You can adjust the airflow by pushing the sliding block up and down.
Max power of the appliance
should not exceed 2200W
GB 5