Cebora WIN TIG AC-DC 230 M Manual De Instrucciones página 65

Code Type
76 [W] Cooling unit not connected
77 [W] Excessive temperature in secondary circuit TH2. Wait until the machine cools down. Check that
90 [W] CNC not connected error.
99 [E] Machine is powering down.
3301286
Error Description Action
Check the pressure switch connection is intact.
the air intake and outlet grilles are not blocked.
If the problem persists, contact technical
assistance.
Check connections; if the problem persists,
contact technical assistance.
Wait for the power source to power down. During
this stage, do not turn the power source back on
by turning the mains switch because the power
source would lock. Turn off the machine, wait for
at least 30 seconds and turn back on.
65/65