Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Table of solutions:
Damage
Posible cause
1- Fuse blown
Indicators (leds) do
2- Damaged
not light when you
contact
start the bike
3-Low Battery
1. Magnet Disc is at
distance of more
than 1mm from
Engine does not start
sensor (see location
when pedalling
in page 3)
2. Brake lever or
sensor failure
1. Fuse is out
2. Damaged
Battery does not
charger
charge. With low
3. Charge conector
battery, green led
damaged
flashes
4. Excessively low
battery
Our bikes technology and its components have been very well
developed. As a result of continuous development, this manual can
not provide enough information to repair your bike correctly. To avoid
risk of accident it is important that your dealer is responsible for
maintenance and possible repairs of your Ecobike.
THANK YOU FOR TAKING THE TIME TO READ THIS MANUAL.
WE HOPE YOU ENJOY YOUR ECOBIKE
THANKS AGAIN FOR YOUR TRUST IN US
All manuals and user guides at all-guides.com
ENGLISH
Solution
1- Check fuse
2- Check battery charge
3. Contact your supplier
1- Make sure the key is ON.
2. Bring the disk magnet to
the sensor
3. Verify the brake levers
are activated
4. Contact your supplier.
1. Check fuse.
2. Check battery charge
3. Contact your supplier
Note:
SU PUNTO DE VENTA ECOBIKE
Horario/Timetable: 12:00 a 14:00 y 17:00 a 19:00 Lunes a
Tel. / Phone. + 34 902 102 943 / Fax. + 34 93 409 11 14
24
YOUR ECOBIKE DEALER
DISFRUTE DE SU BICICLETA
ENJOY YOUR BIKE!!!!!
SERVICIO TECNICO ECOBIKE
ECOBIKE TECHNICALL SERVICE
Tel. / Phone. + 34 902 102 943
viernes/Monday to Friday
OFICINAS CENTRALES ECOBIKE
ECOBIKE CENTRAL OFFICE
C/ Comandante Benítez, 27 Bajos
08028 Barcelona
www.ecobike.com
.
25
Tabla de contenido
