Problems And Solutions; Cleaning And Maintenance - Domo DO338IP Manual De Instrucciones

CHILDPROOF LOCK
Press the decrease and increase buttons at the same time to activate the child lock. You will then see 'L' on
the display. Only the on-off button works when this feature is enabled. Other buttons will not respond.
To deactivate this feature, press and hold the decrease and increase buttons again.

PROBLEMS AND SOLUTIONS

Error message
E0
E01
E02
E03

CLEANING AND MAINTENANCE

· Pull the power plug prior to cleaning the device. Allow the appliance to cool down. Do not use any
caustic cleaning agents and make sure that no water penetrates the device.
· To protect yourself from electric shock, never immerse the device, its cables and the plug in water or
other liquids.
· Wipe off the surface with a damp cloth or use a mild, non-abrasive soap solution.
· Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
· Do not use any petrol products to not damage the plastic parts and the casing/operating panel.
· Do not use any flammable, acidy or alkaline materials or substances near the device, as this may
reduce the service life of the device and lead to deflagration when the device is turned on.
· Make sure that the bottom of the cookware does not scrape across the surface of the ceramic field,
although a scratched surface does not impair the use of the device.
· Make sure that the device was properly cleaned before storing it in a dry place.
· Make sure that the control panel is always clean and dry. Do not leave any objects lying on the hob.
www.domo-elektro.be
Cause
· There is no pot or pan on the cooking plate.
· The pot or pan used is not suitable for induction.
· Temperature is too high.
· A short circuit occurred because the temperature was too high.
· Temperature is too high.
· A short circuit occurred because the temperature was too high.
The electrical grid voltage does not correspond with the appliance
voltage.
33
DO338IP