ErgoAV ERMTL1-01B Manual De Instrucciones página 10

2A-2
2A-3
2A-4
01
A1
04
Position the wall plate template
m( at your desired height and line
up the holes with your stud center
line. Level the wall plate template
m( and mark the holes.
Drill pilot holes using a 7/32 in
(5.5mm) diameter drill bit. Make
sure the depth is not less than
2 3/4 in (70mm).
dB ## ‚
Note: Do not use a drill to tighten the
lag screws. Only use a socket wrench.
Install the wall plate using lag
x:Wv6xml(8dwbHvBHbv,Mw
x:Wv6xml(dxyI,,v@‰ W #,q
against the wall plate. DO NOT
kfvWHdwbHvBHbv,Mwx:Wv6xml(
(Not Included)
10
Level
(Not Included)
(Not Included)
Electric Drill
(Not Included)
1/2 in (13mm)
Socket Wrench
Level
(Not Included)
Pencil