Remote Control; Surface Cleaning - Thulos KOOL BREEZE TH-KB13 Manual De Instrucciones

REMOTE CONTROL

The remote control enables you to control all the same functions
as the control panel from a distance of upto 6 metres. The
remote control should be pointed towards the receiver on the
front of the air cooler.
ATTENTION:
 Do not mix old and new or different types of batteries
 If not in use for a prolonged period the batteries should be
removed.
Please note: Design of the remote may vary.
COOLING / HUMIDIFIER FUNCTION
Before activating the cooling or humidifying function, there must be water in the tank.
The appliance can be used without water as long as only the air mode is used.
To fill the tank, open the lid on the back of the appliance and fill the tank with water slowly. Then
close the lid.
Only use clean tap water and do not fill beyond the maximum level.
Ice cubes can also be inserted into the upper tank to cool the water as it circulates.
Note: It is completely normal and nothing dangerous if you notice a slight odor the first few times
of use. As you use it, the smell disappears.

SURFACE CLEANING

• Disconnect from the electrical current before cleaning the device.
• Clean the plastic casing with a soft, damp cloth or feather duster.
• Do not use chemical or abrasive products as they can cause irreversible damage.
• Make sure that no water enters the control panel.
SPEED
BREEZE
POWER
TIMER
SWING
COOL