High/Low Pressure Operation
The nozzle controls the washer pressure. Push the nozzle in the
closed position for high pressure operation keeping at least 30cm
away from work pieces.
NOTE: No detergent will be dispensed in high pressure mode
LOW Pressure Operation (for dispensing cleaning detergent)
Pull out the nozzle for low pressure operation. This is the required
position to dispense the detergent from the built in detergent
reservoir. See picture 5
NOTE: Detergent need to be diluted to achieve the most effective cleaning. It
is recommended to dilute the detergent in a suitable container to the required
concentration before using
Imagen 5
Switching off the appliance
Turn off the water supply at the tap.
Press the trigger to reduce the pressure in the appliance.
Pull out the water inlet hose, then let the machine run a few seconds to drain the water of storing in
the pump.
Switch off the appliance and disconnect the electric plug from the power socket
Detach the pressure hose. To drain the residual water, lift up the jet gun and squeeze the trigger. See
picture 6
51