FLINQ FQC8197 Manual Del Usuario página 5

solar cells will charge the battery without activating the lamp. Leave the lamp in this
position for at least 2 or 3 sunny days so the battery can be fully charged before
using it!
NOTE/WARNINGS:
⚫
When the product will not be used for a long time, please place the product in a place with
sufficient sunlight, with a charging time for at least 1 – 3 day's in OFF position. For keeping the
function of the battery, you'd better comprehensively charge the product in a place with sufficient
sunlight for once a month.
⚫
The charging time and charging efficiency of the solar panel may be affected by the weather and
the installation position. Considering the conversion rate of solar power generation, if the product
is used with good sunny weather conditions, it will gain higher charging efficiency and
effectiveness by the solar panel and it's battery.
⚫
When there's sunlight and other lights and if the power switch is OFF, the LED lamp will not be
lightened in day and night time.
⚫
The solar lamp should be installed in the place with sufficient sun light to ensure the solar panel
will absorb sunlight sufficiently, so that the working hours of the solar lamp will be prolonged.
⚫
If snow is on top of the solar panel please remove it at all time's so the battery can be
charged correctly by the panel.
⚫ This solar light is only used for private use.
SECURITY AND IMPORTANT SAFETY INSTRUCTIONS:
When using electrical products, certain precautions must be followed, including the
following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
This IP65 product is suitable for outdoor and indoor use.
Do not install near a gas or other sources with a similar heating process.
Do not use the product outside its intended use.
Read and follow all instructions that are indicated on the product or supplied with it.
Keep this manual for future reference.